Herkules Lifting

Less wasted energy with 24K gold.

The IRT FreeForm reflector is carefully designed so that no spots get too hot or too cold. We coat it with 24K gold that reflects up to 97% of the infrared energy onto the surface, not the surroundings.

Longlife lamps – low maintenance.

To keep everything running smoothly, a high-quality ventilation system prevents overheating. This help the lamps last way longer (up to 20.000 hrs).

Net or Glass Protection?

The appropriate protection option depends on the operating environment of the SingleHeaters.

For dusty or contaminated production environments, glass protection is recommended to maintain performance and maximize lamp lifetime — up to 20,000 operating hours.

In cleaner environments, net/mesh protection is often sufficient and offers a more cost-effective solution.

We have gun cleaners for:
A (aqua) = Waterbased
S (solvent) = Solvent
C (combo) = Both waterbased and solvent

Our filters have been tested and approved by paint manufactures. The flocculated paint sludge is caught in a primary filter (pre-filter R8702, 5 pcs). For better performance, there is also a fine filter (main filter R8701, 5 pcs) which will trap even the tiniest particles. The filters are kept above the water to avoid mould and discolouring. Both filters can be reused several times. The pre- and main filter should always be used at the same time.

Drester GP24 comes with two trolleys (1 trolley = 2 tires).
The trolleys are docked together and to the wheel washer for completely automated wheel washing.

We recommend up to 4 trolleys for a smooth process. There are optional article numbers for a GP24 with two trolleys (always included) or 4 trolleys. Use theConfigure-function to choose your model

More trolleys can of course be ordered separately and be used for general handling/logistics (art nr 230556).

QuickLift is an option on Drester wheel washers GP12 and GP10 to help get the tire lifted into washing position in a more ergonomic way. The tire is pushed onto the cradle and is automatically positioned by the wheel washer entry point. It is manually pushed in to start a wash cycle.

If the power supply specification is not suitable,
look for the "Configure" button on the Product page
to choose a more suitable version.